Home Contact us Feedback Site map
BMW E28
 
 
Up BMW E12 BMW E21 BMW E24 BMW E28 BMW E30 BMW E34 BMW E36 BMW E39 BMW E46 BMW E82 BMW Z3 BMW Z4 Other Products  
 

BMW E28 Front Strut Bar
Available in either Black Powder coated Steel or Aluminum

Steel  5.0 lbs

$320.00

Aluminum  3.0 lbs

$375.00

Specifications : Fits all 528, 530, 533, 535, and M5

     Middle Studs measure 45.75" c-c



BMW E28 E.T.A. Front Bar  *SPECIAL ORDER*
Available in either Black Powder coated Steel or Aluminum

Steel   6.0 lbs

$350.00

Aluminum   2.0 lbs

$395.00

Specifications : E.T.A. Bar is designed specifically for the 528 E model only.

                              This Item has been discontinued and is only available by special order. 
                              Special Order items are not returnable or refundable.

     Middle studs measure 45.75" c-c



BMW E28 Rear Strut Bar
Available in either Black Powder coated Steel or Aluminum

Steel with headrests 4.0lbs

$265.00

Aluminum with headrests 2.0lbs

$325.00

Steel no headrests 4.0lbs

$265.00

Aluminum no headrests2.0lbs

$325.00


Specifications : Designed to Strengthen Rear Chassis between the shock towers. 

Please choose your desired bar based on if your car has rear head rests installed or not.




E28 Lower Front X-Brace and Skid Plate *SPECIAL ORDER*

Mason Engineering Lower Suspension X Brace are made of exceptional quality and craftsmanship.  Hand TIG welded in fixture to ensure a correct fitting and make for a more solid drivers feel.  Bolts to lower control arm rear beam pick up points and forward to chassis cross member.   These bars are of a superior one-piece, non-hinged designed to stabilize the front lower chassis under aggressive driving and provide structural integrity to your chassis making the car feel safer at high speeds.  Unlike many other braces on the market there are no bolts or pivot points to flex.  Our brace is designed with an opening to allow for drain plug access for oil change and adjustments after installation.  This lower structure helps to removes under steer push to tighten road handling feel, and markedly adds turn in improvement.   The brace weighs only 4lbs. Easy bolt on installation, no welding required, supplied with correct new high grade bolts, washers and nylon nuts all that is needed for proper install. 

Available in either Black Powder coated Steel or Aluminum.

Steel X-Brace

$350.00

Skid Plate

$150.00

Specifications : Skid Plate made from Aluminum Alloy only

                              This Item has been discontinued and is only available by special order. 
                              Special Order items are not returnable or refundable.



 
Successor
Introduced in June 1981, the E28 was the successor to the E12 series. The new vehicle was similar to the popular E12 but was lower, had more engine choices, and minor styling updates.

Quality
We use the best quality bar stock available to give you a durable top performing product.
 
Copyright 2011 Mason Engineering. All rights reserved